Promata TC-02 is a repeater for Promata TPMS for multiple trailers, designed to receive trailer sensor data and support seamless trailer exchange. It helps the TPMS system identify different trailers and maintain convenient tyre pressure monitoring when trailers are changed.
Technical Specifications
Item | Specification |
Iten Name | TC-02 Repeater |
Working Voltage | 9～33V |
Operating Temperature | -40℃～+85℃ |
Data Output | RF |
IP Level | IP67 |
Certificate | CE / E-MARK |
Repeater Installation for truck
TC-02 Trailer Repeater Installation
What you need:
Installation Position
Install one TC-02 repeater on each trailer, as close as possible to the trailer sensors, ideally near the middle of the sensor cluster.
Power Connection
Connect the TC-02 repeater to a power source that is active when the engine is running, such as the park lights or auxiliary lights. We recommend using PIN 7 or PIN 15 for wiring.
The repeater communicates trailer sensor data to the MATA 7S display through the power line. Therefore, it must be connected to the same power circuit as the display.
Ensure the Trailer Number Is Visible
When powered on, the digital screen on the TC-02 displays the assigned trailer number. Make sure the number is clearly visible after installation. It corresponds to the trailer number shown on the MATA 7S display.
Optional Repeater/Booster:
Repeater will be installed on trailer and receive trailer sensor data, if trailer is required, please install it.
This repeater is fitting with a truck towing with more than 1 trailer, if you have special requirements, please advise with us.
Message Online
Recommended News
